Plesk Linux IP Address Configuration with Cisco PIX 501 or ASA 5505 Hardware Firewall

To Change Server IP Addresses

  1. Connect to your server via SSH (more info).
  2. Switch to the root user (more info).
  3. To create a mapfile of your IPs, run the following command:
    /usr/local/psa/bin/reconfigurator.pl mapfile
  4. Using an editor (nano or vi, for example) to edit the mapfile, remap the public IP address to the internal IP address with the following command, where 22.33.44.55 is the public IP and 10.0.0.1 is the internal IP:
    eth0:22.33.44.55 255.255.255.255 -> eth0:10.0.0.1 255.255.255.255
  5. Run the following to read your mapfile and reconfigure Parallels Plesk Panel IP Addresses:
    /usr/local/psa/bin/reconfigurator.pl mapfile

Note: IP address allocation is monitored. Attempting to add IP addresses to your server that have not been purchased is a violation of your terms of service agreement and may result in the suspension of your account.


Was dit artikel nuttig?
Hartelijk dank voor je feedback. Gebruik het supporttelefoonnummer of de bovenstaande chatoptie als je een vertegenwoordiger van de afdeling Klantenondersteuning wilt spreken.
Fijn dat we konden helpen! Kunnen we nog iets voor je doen?
Dat spijt ons. Vertel ons wat je verwarrend vond of waarom je probleem niet is opgelost via de geboden oplossing.